Electromagnets winding

Cleaning procedure 

The cleaning of the PCB boards is evolving from solvent (as isopropylic alcohol,...) to highly alkaline water based cleaning medium. EXXELIA has performed an extensive study to offer robust technologies to withstand these current cleaning processes. The qualification procedure has included thermal shock, burn in and mechanical testings. EXXELIA has defined gluing, marking, varnishing processes that allow the products to go through more than 5 cleaning cycles and operating up to 180°C. 

Processes compliant to ESA and NASA outgassing standards have also been defined for products specified up to 140°C. 

Wire integrity 

EXXELIA has qualified specific processes to ensure wire integrity for better insulation. The wire undergoes mechanical, chemical and thermal stresses during the winding and cabling process steps. EXXELIA has set up a dedicated process to reduce the impact of these manufacturing steps and improve the overall reliability of the wires and products. 

Finishing 

EXXELIA offers several types of components: Surface Mounted Device, Through Hole or lead terminations products, system integrated components. 

Packaging 

Products are available on trays and, upon request, on reels for easy pick and place, ESD compliant EXXELIA products offer components compliant to IPC/JEDEC standard J-STD- 020 with TP = 260°C and tP = 30 seconds. 

Exxelia is certified EN 9100, a quality standard specific to the aerospace, space, and defense sectors. Our facilities are also ISO 9001 certified (quality management), and some are certified ISO 13485 for medical devices. Other industry-specific standards, such as NADCAP or AQAP, may also apply depending on the products and markets.

The EN 9100 standard ensures a rigorous quality management system tailored to the critical requirements of the aerospace, space, and defense industries. It is required by major OEMs such as Airbus, Safran, Thales, or CNES. This certification guarantees product traceability, risk management, and compliance with international standards.

Yes, some of our facilities are ISO 13485 certified, the quality standard for medical devices. This certification enables Exxelia to design and manufacture components (such as coils, sensors, or capacitors) used in high-reliability medical equipment, including MRI scanners, ventilators, and imaging systems.

The railway industry demands durability, reliability, and long service life. While a dedicated certification like EN 9100 is not required, Exxelia applies IRIS standards and complies with IEC/EN regulations specific to railway applications. Our quality processes ensure component compliance for trains, metros, and tramways, including fire safety and electromagnetic compatibility.

Yes. Exxelia meets defense industry requirements through its EN 9100 certification and compliance with military standards (MIL-STD, STANAG). Our components are qualified for critical applications such as RF systems, embedded electronics, guided munitions, or radar systems. Some products are also subject to customer-specific qualification procedures.

Exxelia SVM provides a wide portfolio of magnetics components, including high-frequency transformers, SMPS transformers, linear power transformers, inductors & chokes, reactors, current transformers, and custom magnetics—covering both high- and low-frequency applications.

Exxelia SVM develops fully custom magnetics, offering in-house tooling, MATLAB/FEMM modelling, special core designs, Litz wire constructions up to 350 A, and complete solutions from prototype to packaging.

Exxelia SVM PRIVATE LIMITED is committed to satisfy its interested parties by providing quality products and on time delivery meeting customers’ and statutory and regulatory requirements. This could be achieved by involving all in the organization and continually improve the effectiveness of Quality Management Systems.

And Exxelia SVM is committed to protect, conserve and enhance aspects of the environment over which we have control or can influence.

These will be achieved through commitment on

• Strive to minimize waste and conservation through pollution prevention.
  Continually improve the effectiveness of Environmental Management System
• Meeting the compliance with Applicable Legal and Other Requirements.
• Conservation of resources like Oil, Water, Electrical energy, Packing material etc
• Instilling awareness to the employees for maintaining a pollution free environment
• Maintain open communication with public and other interested parties regarding Environment, Health and Safety.

Exxelia SVM is an ISO 9001:2015, ISO 14001:2015 Certified Organization and we comply with all Statutory Laws and Regulations.

Our Quality and Production Engineers are certified as per IPC-WHMA-A-620C (Requirements and Acceptance for Cable and Wire Harness Assemblies), IPC J-STD-001 (Requirements for Soldered Electronic Assemblies) & IPC-A-610 (Acceptability of Electronic Assemblies), IPC-A-600 (Acceptability of Printed Boards)

Exxelia SVM products are recognized under UL Insulation Systems
UL File No: E251904

• Class 130 (B) coil and transformer insulation systems designated CIS.04, SIS-130
• Class 155 (F) electrical insulation systems designated SIS-155- 1

Compliance to Safety and Regulatory Standards

• IEC 60601-1, UL 60601, ES 60601-1:2005
• IEC 61558-2- 13, IEC 61558-2- 4
• UL 5085-1, UL5085-2

Reliability Standards
IEC62211 Level B (Vibration test, Drop test, Humidity test, Solder-ability test, Temperature cycle test, Continuous Vibration test)

ROHS, REACH and Packaging Regulations.

Exxelia SVM is the registered member in BOMcheck for Regulatory Compliance Declarations.

The Team at Exxelia SVM works closely with our Customers and Suppliers to establish the highest Quality Standards.